MediaCast Sản phẩm Phụ kiện máy quay Thiết bị ổn định máy quay iKan Gimbal MS1 Beholder

The Beholder MS1 3-Axis Motorized Gimbal Stabilizer brings the simplicity and flexibility of a handheld smartphone gimbal stabilizer to the world of mirrorless cameras. It features a 3-axis, motorized gimbal designed to keep your camera level and isolated from hand shake while allowing you to create smooth, organic moving camera shots. The MS1 features two operational modes: a following mode that smoothes your camera movements and a lock mode that will hold your camera in its position as you move. The MS1 features a thumb button/joystick which you use to select modes. You can also use the joystick to pan and tilt your camera on the gimbal.

The gimbal features a baseplate and sliding camera plate that allows you to adjust the balance of your camera on the sled, both left-to-right and forward-to-back. An included offset balance plate expands the range of cameras that you can use with the Beholder.

The MS1 supports the following cameras:

• Sony A7S
• Sony A7II
• GH4, GH3, GH7
• A6000
• BMPCC
• NX500
• Canon G6
• RX100 - with included adapter plate
• NEX series

Load Capacity	1.9 lb / 0.9 kg
Gimbal	3-axis electronic
Range	Range of Motion: 90 to 180° Yaw: 355° Pitch: 355° ±180° Roll: 355° ±60°
Balance Adjustment	Side-to-Side: 1.1" / 28.0 mm off center Front-to-Back: 1.1" / 28.0 mm off center
Mounting	Camera: 1/4"-20 threaded mounting screw on sliding base plate Tripod: 1/4"-20 threaded mounting hole on bottom of handgrip
Battery	3x Removable 2600 mAh Li-ion 18650-type
Dimensions	6.6 x 4.8 x 10.5" / 16.8 x 12.2 x 26.7 cm
Weight	Without Battery: 1.4 lb / 0.6 kg With Battery: 1.7 lb / 0.8 kg

Packaging Info
Package Weight	3.75 lb
Box Dimensions (LxWxH)	14.7 x 7.7 x 3.8"